HX760 Strain Gauge Loadcell Amplifier to 4-20mA 0-10V Output

Description:

HX760 Amplifier circuit is an electronic scale module. The working principle of this module is to convert the measured change into a change in strain gauge resistance value, and then turn it into an electrical signal output.

This module can provide outputs in 4-20mA signal and 0-10V signal formats.

The advantages of this module are compact size, simple structure, convenient use, stable performance, reliability, high sensitivity and fast measurement speed.

Wiring Description:
+24V: Power source positive supply
GND: Power source negative supply
V: 0～10v voltage output
I: 4～20mA current output
GND: negative power supply
RV1: Potentiometer (OFFER) to adjusts the output midpoint value.
RV2: Potentiometer (ADJ) to adjusts the output gain (amplification factor).

CH1 Load Cell Wiring:
VDD: positive pole of electronic scale power supply (usually red)
I+: electronic scale in-phase input (usually green)
I-: electronic scale inverting input (usually white)
GND:  negative pole of electronic scale power supply (usually black)

Features:

1. Dual output signals in single module.
2. 24-bit A/D converter chip for data accuracy
3. Compact in size.
4. High accuracy and stable performance

Specifications:

1. Differential input voltage:  ±20mV
2. Working Voltage: 9~24VDC
3. Working current: <10mA
4. Operating temperature -40℃~ 65℃
5. Storage temperature -40℃~65℃
6. Size 50*45*10mm, length x width x height
7. Refresh rate: 80Hz
8. Data accuracy 24bit, 24-bit A/D converter chip

Applications:

1. Electronic weighing scales
2. Industrial weighing bridge
3. Industrial belt weigh feeders (BWF)
4. Load cell integration with industrial PLC.

Package Included:

1 x HX760 Strain Gauge Loadcell Amplifier Module

Notes:

Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual colour of the item. Thanks for your understanding.